What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 00:26

“ A fuse is a device which protects the (circuit) against overload and short circuit.”
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What was Easter day like for you as a child?
I post the exact comment here.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What is the difference between the terms "Millennials" and "kids"?
First Sentence:
A circuit breaker is similar, but is resettable.
This is where this question deviates from being a 'generic' question, and becomes more specific.
An AC voltage/ current source, and an ac inductive load.
What is lightning?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then asserts :
Now when you have a certain ac resistance, then a current flows in a loop.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Nutritionists Rank The Best (And Worst) Packaged Deli Meats For Your Health - HuffPost
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
but this device (an Inductor) … impedes the rapid changes in the current.
Edit 2024–10.
2024–10–10[John johnson John Johnson ]
There are three different concepts here that are getting confused.
Why do I want to suck cock tonight?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
nine
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This device then solves the entire problem.
What are the pros and cons of banning homosexuality?
It also is a device that limits the change in current flow.
The bolt then partially travels down the line to your home.
This is 'the assistant's answer'
Why did the Soviet Jews hate the Soviet Union?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
One
(Dc diagram shown, AC is similar).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Why do men date women they are not really interested in?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes the function of a fuse.
[old diagram got deleted by accident]
[image of Common-mode choke]
Upvotes:
So, the voltage could go up to 500 volts, and the fuse will not open up.
A fuse is a non-resetable over current circuit protector.
At one ohm, the resistor has a maximum of 1 watt power.
One is “what exactly is in a ‘surge protector’ ? ”
There are two important concepts here.
the problem then depends on "how fast does the fuse operate?".
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, what happens?
This is where the MOV conducts again, and dissipated the energy.
Barnstars:
For this case there are devices called Metal oxide varistors (MOV).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It seems Mohan does not understand the difference between a comment and an Answer.
The other is “what does a “fuse” do?”
But it can get overloaded, and no longer works.
These are simplified answers to the original question, and does not change anything I wrote above.
eight
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
The MOV will conduct when the voltage exceeds 50% of line voltage.
In schematic diagrams this is the symbol for a fuse:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
These devices are installed between the “hot” and “neutral” and protective ground.
The third is lightning and “how it gets conducted into a home.”
But… the neutral is now “floating” because of the 1 ohm resistance.
but I think this circuit , shows a few more pieces.
Here is a simplified AC power diagram.
At least they know the answer if they wanted it.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
what exactly is a ‘surge’ protector?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes Rainy Season and Lightning.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What does a fuse do?
This one hit behind the barn.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.